EverFocus EPTZ3600 - 3.6. Alarm and Motion Detection

63
3.5.9. EXIT
Exit from the current menu.
3.6. ALARM
In main menu, turn joystick Up or Down to select ALARM. Turn joystick Left or Right to
enter ALARM sub-menu (see diagram 3.34)
(diagram 3.34)
3.6.1. ALARM INPUTS
Press Enter key of keyboard to enter ALARM INPUTS sub-menu. (see diagram 3.35)
a. Go to INPUT NO. selection and turn the joystick Left/Right to select alarm input
number from 1 ~4.
b. Type: Select Normal Close (NC), Normal Open (NO), NIGHT NC, NIGHT NO, or OFF
for alarm type.
NC: Enable a normal close alarm input.
NO: Enable a normal open alarm input.
NIGHT NC: Set camera at night mode with normal close alarm input. When there is
VIDEO SETTINGS
POSITIONS
OSD/AREAS
AUTO MODES
ALARM
PRIVATE ZONES
SYSTEM
INFO
EXIT
ALARM INPUTS <┘
ALARM OUTPUTS <┘
MOTION DETECT <┘
EXIT