EverFocus EPTZ3600 - Autopan

56
3.5.2. AUTOPAN
Press Enter key of keyboard or turn joystick Left/Right to enter AUTOPAN sub-menu (see
diagram 3.23)
(diagram 3.23)
a. TRACKING MODE: (For Auto Tracking Models Only)
Auto tracking can be set on when Auto-Pan function is working. Turn joystick Left/Right
to select tracking mode on/off. The system will go back to Auto-Pan mode when tracking
is not working.
b. ENDLESS MODE
ON: enable endless mode. The speed dome will perform 360 degree endless
auto-pan.
OFF: disable endless mode. The speed dome will perform auto-pan between position
left and position right.
c. SPEED
Select speed from 1~255 and 255 is the highest speed.
d. DWELL TIME L (S)
Select dwell time of the left position from 1~99 seconds.
e. DWELL TIME R (S)
Select dwell time of the right position from 1~99 seconds
AUTOPAN
TRACKING MODE ON
ENDLESS MODE ON
SPEED 32
DWELL TIME L (S) 4
DWELL TIME R (S) 4
SET LEFT POS.
<┘ [EMPTY]
SET RIGHT POS.
<┘ [EMPTY]
DEFAULT ON
RETURN
AUTO TRACKING ON <┘
AUTOPAN <┘
PRESET TOURS <┘
PATTERN <┘
AUTO RESUME OFF
RESUME TO POS.1(H)
POWER UP FUNC PREV MODE
AUTO FLIP ON
EXIT