-PASSWORD ACTIVE: Select YES to activate password mode. Select NO to disable
password mode.
-ENTER PASSWORD: Enter the password
-VERIFY PASSWORD: Enter the password again to confirm your input.
Press IRIS+ key to save and return to previous menu. Press IRIS- key to cancel.
-SAVE AND RETURN: Turn joystick Left/Right to save the changes and return to previous
menu.
-RETURN: Turn joystick Left/Right to return to previous menu without saving changes.
d. LOAD DEFAULT: Press Enter key to load default values, all values will return to factory
default value.
e. Restart: Press Enter key to restart the speed dome.
f. EXIT: Exit from current menu.
3.9. INFO
In main menu, turn joystick Up or Down to select INFO. Turn joystick Left or Right to enter
INFO sub-menu (see diagram 3.44)
(diagram 3.44)
a. VERSION: shows firmware version of this speed dome
b. PROTOCOL: shows protocol of this speed dome
EPTZ31 series
VERSION: V1.0.0
PROTOCOL: AUTO
BAUDRATE: 9600
RS-485-ID: 001
PRESET-CNT: 0000000000
X-CONT: 0000000001
Y-CONT: 0000000004
IRIS+: RETURN
To Next Page
Loading...
