Tilt the joystick right or left to highlight the current zone or tilt up/down to select a different
zone. If you wish to clear the zone you have set, go to “CLR” and press Enter key.
3.4.3. DIRECTIONS
Press Enter key of keyboard or turn joystick Left/Right to enter DIRECTIONS sub-menu
(see diagram 3.12)
(diagram 3.12)
1. Press Enter key of keyboard or turn joystick Left/Right to enter Set North position menu.
2. Move the joystick to North position.
3. Press IRIS+ key of keyboard to save and return.
(diagram 3.13)
4. Go to “DEFAULT NORTH” and press Enter key to set the north position as default north
DIRECTIONS NORTH
SET NORTH
<┘
DEFAULT NORTH [PUSH ENT]
RETURN
CAM. TITLE EPTZ3600__
AREAS
<┘
DIRECTIONS <┘
DISPLAY <┘
EXIT
DIRECTIONS NORTH
SET NORTH
<┘
DEFAULT NORTH [PUSH ENT]
RETURN
To Next Page
Loading...
