To Next PageTo Next PageWhat does it mean when symbols are flashing on my Evers Packaging equipment?
If symbols are flashing on your Evers Packaging equipment, it means the battery temperature is too low. At a higher battery temperature, it recovers by itself, and work is possible. Note that the maximum strap tension is not reached in this state.
Why is the operating panel of my Evers Packaging equipment not reacting?
If the operating panel of your Evers Packaging equipment is not reacting, it is because the button lock is switched on. Switch off the button lock.
What does E11 mean on my Evers Packaging equipment?
If your Evers Packaging equipment displays error E11, shown as a red display with a pulsating symbol, it means that an incorrect battery has been inserted. You should insert the correct battery.
Explains hazard symbols, their meanings, and standard conventions used in the manual.
Details proper disposal methods and environmental compliance for the tool and batteries.
Provides essential safety advice for power tool operation, including work area and personal safety.
Clarifies correct applications and warns against improper uses to prevent hazards.
Emphasizes wearing PPE, maintaining focus, and adhering to safety protocols during operation.
Addresses critical hazards like jamming, crushing, strap breakage, and explosion risks.
Identifies and illustrates the main parts of the tool, operating panel, and battery system.
Explains how the tool functions and describes the available operating modes (Manual, Semi-Automatic, Automatic).
Lists the items included in the tool kit and their respective part numbers.
Describes optional accessories available for the strapping tool, including part numbers.
Covers battery charging procedures, insertion, removal, and checking the charge status.
Guides on selecting and configuring the tool's operating modes (Manual, Semi-Automatic, Automatic).
Details how to adjust the strap tension force using the control panel and buttons.
Explains how to activate and deactivate the touch-pad lock for preventing unintended setting changes.
Describes the function for saving and quickly accessing preferred tool settings.
Explains the tool's energy-saving feature and how it engages and disengages.
Provides a step-by-step guide on how to perform the strapping operation with the tool.
Details the visual inspection process for ensuring a proper and secure strap seal.
Outlines recommended tasks and intervals for routine tool maintenance and upkeep.
Provides instructions for cleaning the strapping tool to ensure optimal performance.
Details the procedure for lubricating critical components to maintain tool stability and function.
Covers the cleaning and replacement process for the tension wheel, a key wear part.
Instructions for cleaning and replacing wear parts like jaws, notchers, and cutters.
Lists common error codes, their probable causes, and recommended corrective actions.
General| Brand | Evers |
|---|---|
| Model | BPT-L19 |
| Category | Power Tool |
| Language | English |
