EverSewn Celine - Using the Twin Needle

USING THE TWIN NEEDLE
T
2.0~5.0
1
3
5
4
2
2 Follow the instructions for single-needle
threading using the horizontal spool pin.
Thread through the left needle.
Set the (included with
the accessories) into the hole on the top of
the machine. Thread through remaining
points, making certain to omit the thread
guide above the needle and pass thread
through the right needle.
auxiliary spool pin
2
3 Thread each needle separately.
Please Note: Make sure that the two threads
used to thread the twin needle are of the
same weight. You can use one or two colors.
4 Before sewing adjust the stitch width, Turn the
handwheel to check the needle clearance, so
that needle does not hit the needle plate.
3
4
1 Insert the twin needle.
1
Please Note: When sewing with twin
needle, always proceed slowly, and make
sure to maintain a low speed to insure
quality stitching.
6 Select a stitch pattern and start to sewing.
Utility and decorative patterns 00-14, 27-
99 can be used.
Sewing result will be a pattern with two
parallel stitch lines.
5
* The twin needle is an optional accessory.
Please Note: When using twin needles, use the " T " presser
foot regardless of what kind of sewing will be carried out.
Attention: When using twin needles, use the
all purpose foot (T) regardless of what kind of
sewing foot will be carried out.
Use only twin needle assemblies with max.
2mm needle distance.
65