EVGA 141-BL-E757 - Power Management Setup Menu; ACPI Function

50
Power Management Setup
Menu
Select Power Management Setup from the CMOS Setup Utility menu and
press Enter to display the Power Management Setup menu.
Figure 8. Power Management Setup Menu
ACPI Function
This function on the Power Management Setup menu allows you to enable or
disable the ACPI function.
 :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7: Defaults
ACPI function [Enabled]
APCI Suspend Type [S3(STR)]
Run VGABIOS if S3 Resume [Auto]
Soft-Off by PWR-BTTN [Instant-Off]
Wake-Up by PCI Card [Enabled]
USB KB Wake-Up From S3 [Disabled]
Resume by Alarm [Disabled]
x Day of Month Alarm 0
x Time (hh:mm:ss) Alarm 0 : 0 : 0
POWER ON Function [Disabled]
x Hot Key Power On Ctrl-F1
PWRON After PWR-Fail [Off]
Item Help
Main Level 