EVGA 141-BL-E757 - Smartfan Function

Configuring the BIOS
57
SmartFan Function
Press Enter to display the SmartFan Function menu.
Use this menu to control the speed of the various fans on the motherboard. Set
CPU fan speed to [SmartFan] when you want the speed of the fans
automatically controlled based on temperature. To set the fan speed to a
constant rate, select [Manual] and then enter the speed from 0% to 100%.
Set the desired speed for the Power and Chassis fans from 0% to 100%. The
system defaults to 100%.
CPU Fan Speed Control [SmartFan]
x Manual Fan Speed, % 100
If temp > 60ºC, Set Fan Speed 100%
If temp < 30ºC, Set Fan Speed 50%
Power Fan Speed Control [SmartFan]
x Manual Fan Speed, % 100
If temp > 60ºC, Set Fan Speed 100%
If temp < 30ºC, Set Fan Speed 50%
Chassis Fan Speed Control [SmartFan]
x Manual Fan Speed, % 100
If temp > 60ºC, Set Fan Speed 100%
If temp < 30ºC, Set Fan Speed 50%
Aux Fan Speed Control [100]