EVGA 141-BL-E757 - PCI;VGA Palette Snoop; INT Pin 1;2;3;4;5;6;7;8 Assignment; Maximum Payload Size

Configuring the BIOS
55
Use Legacy ISA for devices compliant with the original PC AT Bus
specification. Use PCI/ISA PnP for devices compliant with the plug-and-play
standard, whether designed for PCI or ISA Bus architecture.
PCI/VGA Palette Snoop
This item is designed to overcome problems that may be caused by some
nonstandard VGA cards..
INT Pin 1/2/3/4/5/6/7/8 Assignment
This function on the PnP/PCI Configuration menu allows you to set the INT
Pin 1/2/3/4/5/6/7/8 Assignment.
Maximum Payload Size
This function on the PnP/PCI Configuration menu allows you to set the
maximum TLP payload size (in bytes) for the PCI Express devices. Use the
Page Up and Page Down keys to scroll through sizes or enter the number using
the keyboard numbers or use the + and – keys to go up and down the list of
sizes.
IRQ-5 assigned to [PCI Device]
IRQ-9 assigned to [PCI Device]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-12 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]