EVGA 141-BL-E757 - Memory Feature; Memory Frequency

Configuring the BIOS
59
Memory Feature
Select Memory Feature from the Frequency/Voltage Control menu and press
Enter to display the Memory Feature menu.
Figure 12. Memory Feature Menu
 Memory Control Setting
This function is allows you to select the Memory Control Setting.
 Memory Frequency
This function is allows you to select the Memory Frequency. The options are
Auto, 800Mhz, 1067Mhz, 1333Mhz, and 1600Mhz, 1867Mhz.
 Channel Interleave Setting
This function is allows you to select the Channel Interleave Setting. The
options are 1 way, 2 way, 3 way, 4 way, 5 way and 6 way.
 :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7: Defaults
Memory SPD [Standard]
Memory Control Setting [Disabled]
Memory Frequency [Auto]
Target Memory Frequency 1600MHz
Channel Interleave Setting [6 way]
Rank Interleave Setting [4 way]
Memory Low Gap [Auto]
Parameters Setting Current
tCL Setting [Auto] 8
tRCD Setting [Auto] 8
tRP Setting [Auto] 8
tRAS Setting [Auto] 19
tRFC Setting [Auto] 59
Command Rate [Auto] 1T
tRRD Setting [Auto] 4
tFAW Setting [Auto] 20
tRTP Setting [Auto] 4
tWR Setting [Auto] 8
Item Help
Main Level 
Phoenix – AwardBIOS CMOS Setup Utility
Memory Feature