Configuring the BIOS
51
ACPI Suspend Type
This function on the Power Management Setup menu allows you to select an
ACPI Suspend Type. Types to select from are [S1&S3], [S1(POS)], and
[S3(STR)].
Run VGABIOS if S3 Resume
This function on the Power Management Setup menu allows you determines
whether or not to enable the system to run the VGA BIOS when resuming
from S3(STR) or S1&S3. The Options are Auto, Yes and No.
Soft-Off by PWR-BTTN
This function on the Power Management Setup menu allows you to set Soft-
Off by PBNT to [Instant-Off] or [Delay 4 Sec].
Wake-Up by PCI Card
This function on the Power Management Setup menu allows PCI Card to wake-
up the system from Soft-off state.
USB KB Wake-Up From S3
This function on the Power Management Setup menu allows a USB keyboard
device to wake-up the system from S3 state.
Resume by Alarm
This function on the Power Management Setup menu allows you to enable or
disable the Power-on by alarm function. Set to [Disable] to prevent power-
To Next Page
Loading...
