13
MANAGING PRINT SETTINGS
Once the ribbon has been installed, your Edikio printer will adapt automatically
to optimize its settings and setup.
A management application called Edikio Print Center is available to help you if
necessary to change predefined settings.
To access this application:
∙ From the Start button on the bottom left of your screen in the Windows task
bar, select All Programs, Evolis Card Printer, Edikio Printer Suite, Edikio
Print Center.
∙ The application displays all of the Edikio printers installed.
∙ Select the desired printer.
∙ Right-click the name of the printer, select Properties to access the setup area or double-click the printer name.
Pay attention to the settings defined under the printer driver
Properties and do not hesitate to contact your Edikio by Evolis
reseller for any advice and assistance before making changes.
NOTE
To Next Page
Loading...
Need help?
General
