25
Recommended cleaning cycle: every 5 routine cleaning cycles.
Servicing accessory: cleaning pen.
NOTE
Unplug the printer from its power supply before cleaning the print head.
Follow the cleaning cycles scrupulously.
Avoid any contact between the print head and any metal or sharp objects.
Avoid touching the print head with your fingers, as this could affect print quality or permanently damage the print head.
Servicing the print head
1 2 3 4
Wait for 2 minutes after cleaning before using your printer.
NOTE
The cleaning pen can be used up to 8 times for cleaning the print head.
Follow the procedure below:
1 Take the cleaning pen and remove the lid.
2 Unplug the power supply, open the cover, and find the print head.
3 Gently rub the pen from left to right along the print head as indicated for a few seconds.
4 Close the cover. Reconnect the printer. Put the lid back on so that the cleaning pen can be used again.
To Next Page
Loading...
Need help?
General
