21
ROUTINE PRINTER CLEANING (continued)
6 Remove any cards in the feeder if necessary.
7 Double-click the control button on the control panel before inserting the cleaning card.
8 Remove the film from the adhesive card
1
and insert the cleaning card into the feeder as shown, adhesive side up
2
. Cleaning
starts.
9 The used cleaning card will be automatically ejected into the output hopper.
6 7 8 9
Before using your printer, remember to readjust the gauge to the desired card thickness.
NOTE
Routine cleaning may also be launched from the Edikio Print Center by clicking on "Start cleaning."
EPC
To Next Page
Loading...
Need help?
General
