Evolis Elypso - Contact Smartcard Encoding; Smartcard Contact Station Functionality

55
C1b ? CONTACT SMARTCARD ENCODING
$SULQWHUÀWWHGZLWKDVPDUWFDUGFRQWDFWVWDWLRQZRUNVLQH[DFWO\WKHVDPHZD\DVDEDVLFFDUGSULQWHU7KH(YROLV VPDUWFDUGFRQWDFW
station is used to program chips to ISO 7816N2 standards.
³
Contact station location
The contact station is a module installed either in the factory or on site by your Evolis dealer. It is located over the path taken by the cards
and after the print head. To contact the smartcard, the contact station descends mechanically against the smartcard. The programming
sequence for a chip is always carried out before the card is printed.
Use only smartcards compliant with the ISO 7816>2 standard.
Never print over the chip.
C