Evolis Elypso - Page 58

58
³
The command sequence is as follows:
Sending the SIS sequence:
O A card is moved from the feeder to the contact station, and stops underneath it.
O The contact station is pushed downwards to make contact with the card.
O The printer connects the contact station to the DBN9 connector.
O The chip can be programmed via the external coupler.
Refer to the Programming Guide for the Evolis printer for more information on programming a smartcard and the
2SWLRQLQVWDOODWLRQPDQXDOIRUFRQÀJXUDWLRQRIWKHFDUGSUHVHQWVLJQDO
The Evolis product catalogue also includes printers equipped with a chip contact station and a builtNin encoder. These encoders connect
to the PC via a USB interface.
C