4-4e UPDATING THE FIRMWARE (UNDER WINDOWS)
Before any update, please contact your Evolis dealer who will be able to guide you on the advisability or otherwise of carrying out an
dealer.
Updates can be downloaded from the website at
www.evolis.com :
Select your printer model, then click on the Print drivers and Firmware link
When prompted by the program, click on the Download
If the printer is not showing a ‘READY’ status, this means that the update has not been carried out correctly or, possibly,
that the printer is not working properly. Check the connection cables and run a new update.
The update is complete, and your equipment is ready to customise your cards.
Never interrupt the transfer between computer and printer during the download phase (powering off the printer
or computer, unplugging a cable). This would result in a complete inability to restart the printer. Should such an
incident occur, please contact your Evolis dealer, who will replace your printer’s processing board.
4
50
To Next Page
Loading...
Need help?
General
