4-2 Warnings and diagnosis
Although the Evolis printer was designed to work independently, keeping user involvement to a minimum, it may nonetheless prove useful
to gain some familiarity with the main warnings.
LCD Display Description Action requise
Initializing...
Start-up in progress No
Ready The printer is ready to receive data. No
Printer Cover Open The printer cover is open Yes Close the cover The printer restarts
Feeder Empty The card input feeder is empty. Yes Put cards in the card feeder.
Stacker Full The card output stack is full. Yes Empty the output stack.
No Feeder The card feeder is missing or incorrectly installed. Yes Check the card feeder installation.
No Stacker The output stack is missing or incorrectly installed. Yes Check the output stack installation.
Feeder Almost Empty The input feeder is approximately 90% empty No
Stacker Almost Full The output stack is approximately 90% full. No
No encoding module Yes
Check the encoding module
installation.
Ribbon error
No ribbon in the printer.
End of ribbon.
The ribbon is torn
Yes
Check the condition of the ribbon in
the printer. If you have a print job in
progress, this restarts with a new card.
Need Cleaning The printer must be cleaned. Yes See section 3 - Maintenance
Cleaning Compulsory It is imperative that the printer is cleaned. Yes See section 3 - Maintenance
Reject Tray Full The hopper holding rejected cards is full. Yes Empty the reject hopper. See section 3.
Printhead Error
The printer has detected a problem related to the print head.
Print jobs are interrupted.
Yes Contact your Evolis dealer for assistance.
4
37
To Next Page
Loading...
