1-4e MAGNETIC STRIP ENCODING
Paramétrables en haute coercivité (HICO) ou en basse coercivité (LOCO) par simple clic à partir du pilote d’impression Windows, les
encodeurs magnétiques Evolis sont cependant expédiés réglés par défaut en haute coercivité (HICO).
Use only magnetic strip cards that comply with ISO 7810 and ISO 7811 standards.
The magnetic strip must be moulded into the card to work properly.
Never use cards with a glued-on magnetic strip.
³
Card positioning
for the encoding module, in position A or in position B.
Position A = magnetic strip encoder in the lower position = cards loaded with the magnetic
strip downwards.
Position B = magnetic strip encoder in the upper position = cards loaded with the magnetic
strip uppermost.
Refer to section 1-3c for loading the cards.
³
The magnetic encoder functions are found in the print driver’s Tools dialogue box by clicking on the Encoding Settings button.
1
17
To Next Page
Loading...
Need help?
General
