Evolution Aqua EAZYPOD AUTOMATIC - Setting Up the EazyPod Automatic; Fit the Eazy Connector on the Outlet Pipe; Connect Waste Valve

SETTING UP THE EAZYPOD AUTOMATIC
FIT THE EAZY CONNECTOR ON THE OUTLET PIPE
GLUE HOSETAIL / PIPE INTO AUTOMATIC WASTE VALVE
Fit the 4”-3” EazyConnector onto the outlet pipe and tighten the jubilee clip with a flat head screwdriver.
You can connect your waste valve to flexible hose (minimum 1”) with the help of a glued hosetail and
adaptor provided. Or you can connect the waste with 1½” PVC pipe.
GLUE HOSETAIL
AND ADAPTOR
INTO AUTOMATIC
WASTE VALVE
OR GLUE
1½” PVC PIPE
INTO THE
AUTOMATIC
WASTE VALVE
9