Evolution Aqua EAZYPOD AUTOMATIC - Add K1 Micro Media; Fit the Non-Return Hosetail

SETTING UP THE EAZYPOD AUTOMATIC
ADD K1 MICRO
FIT THE NON RETURN HOSETAIL
Your EazyPod Automatic is supplied with 18 litres of K1 Micro. Simply empty the entire bag into the
inner chamber (C) of the EazyPod Automatic.
To set up your EazyPod Automatic ready for use, follow these simple steps:
For automatic cleaning you need to install the non-return hosetail onto the inlet. This helps to prevent
back siphoning to the pond when the EazyPod Automatic is in cleaning mode.
STEP 1: Fit O-Ring on the
hosetail thread of the non
return hosetail.
STEP 2: Screw the non-return
hosetail into the inlet thread.
STEP 3: Ensure the non-return
hosetail is hand tightened
until the rubber O-ring seals
on the inlet face. (DO NOT
OVERTIGHTEN)
8