CONNECTION TO THE ELECTRICITY SUPPLY
PLEASE NOTE: Electrical installations must be done by a qualified electrician.
The power supply must meet the specifications on the product.
The cores in the supply cable are coloured in accordance with the following code:
Brown = Live. Blue = Neutral. Earth = Green/Yellow.
Do not use the cable to lift the EazyPod Automatic as this may cause damage.
WARNING - A Residual Current Device (RCD), also known as the Residual Current Circuit Breaker
(RCCB), with a tripping current not exceeding 30mA must be installed in the supply circuit. A means
of disconnection from the supply having a contact separation of at least 3mm in all poles must be
incorporated in the wiring.
Caution: Use in the area of the garden pond only if the installation complies with the
relevant wiring regulations. Please consult a qualified electrician.
Caution: Always disconnect all pond appliances from the mains supply before
putting your hands into the water.
All electrical installations and wiring must be adequately protected to prevent
any damage.
CONNECTING UV TO THE ELECTRICITY SUPPLY
FOLLOW THE ADVICE ABOVE.
Enough electrical cable is supplied with the UV to connect to the mains electric. This unit must be
connected to permanent wiring. A switch with 3mm contact separation must be provided in the fixed
wiring to provide disconnection from the electricity supply.
13
To Next Page
Loading...
