Evolve BAMBOO GTR - Changing Speed Modes on the Remote

/24
Once your remote is on and paired to your skateboard it will
begin in ‘SAFE MODE’ as the rst speed mode setting.
Now press either MODE 1 or MODE 2 button once, this will
change the speed from SAFE MODE to the previous speed
setting of your last ride.
CHANGING SPEED MODES ON THE REMOTE
MODE 2 BUTTON
MODE 1 BUTTON
Each time you press the MODE 1 BUTTON, this will INCREASE
the speed mode from ECO MODE through to CUST MODE.
Each time the MODE 2 BUTTON is pressed it will DECREASE
the speed mode from CUST MODE through to ECO MODE.