/26
The SAFETY SWITCH is located under the accelerator trigger.
It must be pressed by your 2
nd
and/or 3
rd
nger as you engage
the accelerator trigger to begin riding. The speed mode display
on the LCD screen will turn a solid color once you press in the
SAFETY SWITCH.
IF YOU DO NOT PRESS THE SAFETY SWITCH IN AS YOU
ENGAGE THE ACCELERATOR TRIGGER, THE BOARD WILL
NOT MOVE.
Once you begin moving and reach speeds of 3-5km/hr or
above, you will be able to ride freely without engaging the
SAFETY SWITCH during acceleration, braking or neutral trigger
movements. When you come to a stop or reach 0km/hr, the
SAFETY SWITCH reactivates. You must press in the SAFETY
SWITCH the next time you wish to use the accelerator trigger
again.
The SAFETY SWITCH can be disabled or re-enabled by going
to the ‘Options’ menu and changing ‘Dead Man’ to ‘off’ or ‘on’.
SAFETY SWITCH
To Next Page
Loading...