/36
The auto safe function is a feature of the remote that is designed
to detect any potential issues with the control of the board.
This can relate to anything to do with the battery performance,
motor controller performance and remote operational control.
The auto ‘Safe’ mode will be activated if any of the above is
disturbed, even if it’s minor, the remote will detect and make the
control go to safe mode.
If the safe mode does come on when riding, the remote will
vibrate for one second giving you warning and the control
feeling will have weak acceleration and braking strength. If there
is a genuine error with the skateboard, error messages will be
displayed in the ‘Product Info’ screen.
To get out of the auto ‘Safe’ mode function, simply press the
MODE 1 button to then be taken back to the previous speed
setting you were riding.
AUTO SAFE FUNCTION
To Next Page
Loading...