/29
The board is controlled by a combination of the rider and
remote. The rider operates the remote which controls
accelerating and braking.
Turning and stability is dependent on the rider.
To turn the board the rider must lean in the direction they wish to
turn. To keep stable, it is recommended to stay relaxed, so that
your body can absorb bumps and movements created by the
terrain or remote input.
It is recommended to move your weight toward your front foot
whilst accelerating and towards your rear foot whilst braking to
account for the forces created by such actions.
Evolve Skateboards highly recommend starting in ECO MODE
when learning to ride the board and use the remote. Be sure
to be very gentle with the trigger control to avoid being thrown
off the board. Start by trying to move as slowly as possible
within these speed modes when using both the brakes and
acceleration.
Slowly progress through the speed modes when comfortable.
PRO AND GTR MODES ARE VERY POWERFUL AND THE
TRIGGER IS HIGHLY SENSITIVE.
CONTROLLING THE BOARD
To Next Page
Loading...