/45
If you regularly clean and maintain your electric longboard, it will
last a long time and ride at its best:
• Always clean your bearings for best roll and quietest/
smoothest ride. Bearings get dirty and affect ride quality
which may reduce battery performance and cause possible
bearing failure.
• Always check all screws/nuts throughout the skateboard are
tight (truck nuts, wheel nuts etc). You are responsible for this.
• Rotate the wheels on the skateboard as you would do so with
any longboard skateboard, as the drive wheels will wear the
fastest.
• Regularly clean & check the belt and drive gear for any
damage. Replace if necessary.
• Always store your board at room temperature.
• Clean your board from dust and dirt so its looks and rides as
new at all times. Use a damp & dry cloth to clean.
• Be sure to keep your All Terrain tyres between 30-45 PSI tyre
pressure when riding. If the tyres run lower than this PSI then
your ride times will reduce due to having at tyres.
MAINTENANCE GUIDE
NOTE -YOU ARE RESPONSIBLE FOR ALL MAINTENANCE RELATING TO THE
EQUIPMENT, FAILURE OF ANY PART DUE TO LACK OF MAINTENANCE IS NOT
COVERED BY WARRANTY.
To Next Page
Loading...