/34
There are low battery warnings set on the remote that provide
you with notice of when to expect the skateboard to run out of
power. See below at what stage the warnings come on:
1. At 10% the remote will vibrate quickly one time.
2. At 5% the remote will vibrate once every 5 seconds.
3. At 1% the remote will vibrate for 5 seconds with a brief pause
then continue to vibrate.
4. At 0% the remote will continue to vibrate then go into ECO
MODE. During this time you will not be able to use PRO or
GTR speed modes as the battery is virtually at.
LOW BATTERY WARNINGS ON THE REMOTE
NOTE – THE AUTO ECO MODE WILL PREVENT THE BOARD FROM TURNING OFF
SUDDENLY WHEN THE BATTERY IS VERY LOW ON VOLTAGE AND THE RIDER IS
TRYING TO STILL RIDE THE BOARD IN THE FASTER CURRENT SPEED MODES.
THIS PROTECTS BOTH THE RIDER AND BATTERY.
IF THE RIDER CHOOSES TO IGNORE THE LOW BATTERY WARNINGS, THE
BATTERY METER SOFTWARE WILL ALLOW THE RIDER TO CONTINUE TO USE
THE BOARD FOR A SHORT TIME AFTER THE BATTERY METER GOES TO 0%.
To Next Page
Loading...