EVS XT Series - Connection Diagram with EVS Xhub SDTI HUB; Required Conditions to Set up and Run Xnet

XT Series DISK RECORDER - Technical Reference
EVS Broadcast Equipment SA - Nov 2005
Issue 3.0
24
3.8.2 CONNECTION DIAGRAM WITH EVS XHUB SDTI HUB
3.8.3 REQUIRED CONDITIONS TO SET UP AND RUN XNET
1. All systems on the network must be XT Series Servers, XFiles,
XStores or Xhubs.
2. The SDTI advanced (for network client, master or server modes)
option code must be validated in the options list.
3. They should all be running compatible software version. A warning
message is displayed when trying to connect an XT system with a
software version that is not compatible with the network server.
4. The following parameters must be similar on all systems :
a. Disk Blok Size (512K, from Advanced Parameters Menu)
b. SDTI Speed (normally 540Mbps, from Hardware
Configuration Menu)
Editor