EVS XT Series - MTPC Board

XT Series DISK RECORDER - Technical Reference
EVS Broadcast Equipment SA - Nov 2005
Issue 3.0
46
4.5 MTPC Board
The function of the PC board is mainly the control of the Video hardware
via the software and to interface the peripheral equipment (i.e. remote
controller) with the Video hardware.
FLOPPY
DRIVE
IDE
HDD
CPU
BOARD
In standard configuration the PC hardware is composed by:
• One mounting PC board with serial ports and LTC reader and
generator and controlled by the motherboard
• IDE System Hard disk: the IDE disk drive is used for storing the EVS
software and the DOS operating system. Neither audio nor video
data is saved on this disk. The capacity of this drive may vary
depending on market availability, but the system partition is always
set to 1GB. The remaining capacity of this drive is not used.