Chapter 3
Housing & markings
requirements.
They have been granted modular approval for mobile applications. Integrators may use
eWON with telecommunication modules in their host application that can be categorized
as mobile devices without additional FCC or R&TTE certification approvals if the following
conditions are met (otherwise, additional FCC approvals must be obtained):
• At least 20 cm (7.88”) separation distance between the antenna and the user’s body
must be maintained at all times.
• The eWON and its antenna must not be collocated or operating in conjunction with
any other transmitter or antenna.
• To comply with regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain, including cable loss, are given
in the § 8.8.2 Antenna Specification
• No modifications can be made by the user that can be of influence on the EMC
behavior of the device.
3.3.6. Certifications
Please check our http://support.ewon.biz page to get the current versions of:
• Declaration of Conformity (DoC)
• Other official documents including certificates
3.4. Equipment information & versions
The eWON hardware and software revisions can be checked with a web browser on the
eWON server.
Once logged onto the eWON, clicking on the eWON logo shows these revisions.
eWON info page details
Page 13 / 39 eWON 4005CD | IG 002
To Next Page
Loading...
