eWON 4005CD - LAN Interface Factory Configuration; WAN Interface Factory Configuration; Modem Interface (Incoming PPP) Factory Configuration

Chapter 6
IP parameters configuration
Default IP settings:
LAN Interface factory configuration
IP address 10.0.0.53
Subnet mask 255.255.255.0
WAN Interface factory configuration
IP address 10.1.0.53
Subnet mask 255.255.255.0
Gateway 0.0.0.0
- WARNING -
By default, the WAN interface is disabled. Then, first connection must be done by the LAN.
Modem Interface (incoming PPP) factory configuration
IP address 202.0.0.240
Subnet mask 255.255.255.0
- Note -
By default, the incoming PPP connection is allowed.
Page 26 / 39 eWON 4005CD | IG 002