Chapter 3
Hardware description
3.5. LAN Switch Specifications
3.5.1. Boot process
During the (re)boot process, the eWON prevents the switch feature from working. This means
that it might require little time starting from the power on (or the reboot request) to get the
LAN switch to be fully operational.
When an eWON router is configured to operate a certain way, it is part of the strategy, if no
other method worked, to reboot itself. This is the ultimate eWON strategy to try restoring the
requested communication channels and be consistent with requested configuration.
Page 18 / 30 eWON COSY 131 | IG 022