Chapter 2
Safety, Environmental & Regulatory Information
2. Safety, Environmental & Regulatory Information
2.1. Scope
The present heading addresses Safety, Environmental & Regulatory Information for the
eWON Cosy 131 family.
2.2. Power supply
The external power supply is a third party device that is not part of this certification.
The device shall be supplied by a LPS power supply certified according to IEC/UL60950-1 or
Class 2 per NEC (See annex A.2. Specification of the External Power Supply for detailed
information).
2.3. Applicable Directives, Standards and Compliance
The product described in the present Installation Guide complies with the CE, R&TTE
directives and the FCC regulations related to the wireless modems.
The product described in the present Installation Guide belongs to class A Information
Technology Equipment (ITE). In a domestic environment this product may cause radio
interference in which case the user may be required to take appropriate measures.
2.3.1. Applicable European Directives
The product described in the present Installation Guide is in conformity with the following EC
directives:
• RoHS Directive 2011/65/EU
• EMC Directive 2004/108/EC
• R&TTE Directive 1999/5/EC (for versions includind RF modems)
The product conforms to the corresponding R&TTE articles:
RF spectrum efficiency (Art 3.2); EMC (Art. 3.1b); Safety (Art. 3.1a)
• REACH Directive 2006/121/EC
• For COSY 131, Cellular 3G+ only: to comply with R&TTE directive
• Antenna must be mounted on a grounded plate
• RFI suppressors must be mounted on the power supply cable in the following
order, starting at 3cm of the connector and going to the power supply:
Wurth Elecktronik 742-717-33
Wurth Elecktronik 742-716-22
Wurth Elecktronik 742-711-11
Page 6 / 30 eWON COSY 131 | IG 022