eWON Cosy 131 Ethernet - Removing from DIN-rail

Chapter 2
Safety, Environmental & Regulatory Information
• Removing the unit from DIN-rail
Release the unit by pulling the slide lock downwards while gently tilting the unit
upwards. Free the unit by unhooking it from the upper rail edge. See 2.4.2 Mounting
instructions
The product is intended to be mounted vertically, label on the right side
Installation on DIN-rai
Wall mounting position
1 SIM card slot
2 DIN rail mounting braket
3 Screw holes intended to receive M4 screws with an 8mm diameter head
Page 8 / 30 eWON COSY 131 | IG 022
1
1
2
3
3