Excell 320S - Appendix 2: Function Table (Continued); Zero Tracking and Stability Parameters; FNC Group Function Settings

04012XXX
EXCELL PRECISION CO., LTD
ZSME400000011
66
CSP-06
Time of
zero
tracking
0.0 ~ 5.0
(sec)
Time and range of zero tracking should be
use at the same time. If the time is set to 0.0,
the zero tracking function is disabled
1.0
CSP-07
Range of
zero
tracking
0 ~ 9
Range of zero tracking = (setting value½)D ,
D=min. division
Range and time of zero tracking should be
use at the same time. If the range is set to 0,
the zero tracking function is disabled
2
CSP-08
Investigate
time in stable
0.0 ~ 5.0
(sec)
Investigate time and range should be use at
the same time. If the time is set to 0.0, the
investigate time is disabled
1.0
CSP-09
Investigate
range in stable
0 ~ 9
Investigate time and range should be use at
the same time. If the range is set to 0, the
investigate range is disabled
2
CSP-10
Weight
unstable,
function ZERO
and TARE
0
Action
0
1
None
CSP-11
Gross Weight
is negative,
function TARE
0
Action
0
1
None
FNC Group Function Setting
Item
Function
Setting value
Default
Parameter
Description
FNC-01
Digital Filter I
0
Fast
Slow
1
1
2
3
4
5
6
7
8
9
FNC-02
Digital Filter II
0
Disabled
3
1
Less filter
Greater
2
3
4
5
FNC-03
Key – Locked
000000

111111
0
Normal
(lock disable)
The bits and front
panel key
positions are
related to each
other
000000
1
Close
(lock enable)