Excell FB530 User Manual

EXCELL PRECISION CO., LTD.
0201810X ZSME300000292
12
Press key
Press key
Press key
3-1 F4 Check Weighing Configurations
 If hold mode (F8) is set, accessing to F4 is denied.
Use or key to select F4
Preset “LO value”
(LO value  10d)
Press and
key to set “ LO value”
E.g. LO value = 2 kg
Preset “HI value”
(HI value  LO value)
Press and
key to set “HI value”
E.g. LO value = 2.5 kg
Preset “Beeper value”
Press and
key to set “HI value”
E.g. Beeper value = 22
Press key for 5 times
to clear HI, OK, LO values
.
kg
.
kg
Press key
.
kg
key = Increase the flash value by one (from 0 to 9)
key = Confirm key
.
kg
 
A B
A  0 = After stable, the beeper beeps and the
indications are on
1 = After stable, the beeper beeps; whether
stable or not, the indications are on.
2 = whether stable or not, the beeper beeps
and the indications are on.
3 = open warning device: when the weight is
higher than HI value and the weight is
stable, LCD is on and Relay Card open.
B  0 = No beep
1 = OK (when the weight is between Low limit
& High limit.), the beeper beeps.
2 = When the weight is under or equal to Low
limit (must be over 10d) & over or equal
to High limit, the beeper beeps.
 LCD indication description:
     
 
10d Low limit value High limit value
.
kg
kg
kg
Press key

Excell FB530 Specifications

General

Brand	Excell
Model	FB530
Category	Measuring Instruments
Language	English