USE AND MAINTENANCE MANUALUSE AND MAINTENANCE MANUAL
Chain hoist from 198kg to 2500kg
2.62.6 PROHIBITIONSPROHIBITIONS
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
DO NOT move the hoist by handling it from the power and/or control cable.
DO NOT operate the hoist if the power and/or control cable and relative cable glands are damaged.
DO NOT install and use the hoist in explosive atmospheres.
DO NOT install and operate the hoist in environments with a temperature below -10°C or above 40°C.
DO NOT move and/or use suspended loads greater than the rated capacity of the hoist; in case of doubt
have the actual load in use checked by a competent person.
DO NOT pull the suspended load diagonally or drag it across surfaces.
DO NOT move the suspended load if the chain is twisted.
DO NOT alter and/or install accessories to the hoist if these are not provided for by the manufacturer or
authorised representative.
DO NOT operate the hoist if the operator does not have a clear view of the machine and the loads to be
moved.
DO NOT move persons with EXE RISE D8 and D8+ electric chain hoists as it is forbidden by the
manufacturer/authorised representative.
DO NOT install lifting accessories in the hook saddle whose dimensions are not sufficient to fit on the
axis of the chain.
DO NOT connect the hoist plug directly to a power outlet but use a control system that meets the
minimum requirements as specified in these instructions.
DO NOT install the hoist in a position where the chain, hoist frame and chain bag can come into contact
with external bodies.
DO NOT use the hoist chain to harness the suspended load or to perform operations other than vertical
lifting.
DO NOT approach the moving chain so as not to be exposed to the risk of entanglement and/or
dragging.
To Next Page
Loading...