USE AND MAINTENANCE MANUALUSE AND MAINTENANCE MANUAL
Chain hoist from 198kg to 2500kg
6.56.5 CONNECTION TO THE SUSPENDED LOADCONNECTION TO THE SUSPENDED LOAD
Insert the Chain hook inside the load suspension point. Only use CE-marked lifting accessories to connect the
load suspension point to the hoist Chain hook.
DANGERDANGER
Do not move and/or use suspended loads greater than the rated capacity of the electric chain hoist! In caseDo not move and/or use suspended loads greater than the rated capacity of the electric chain hoist! In case
of doubt, have a competent person check the actual load in use.of doubt, have a competent person check the actual load in use.
DANGERDANGER
Attach the suspended load to the body hook of the hoist by means of lifting accessories and/or suspensionAttach the suspended load to the body hook of the hoist by means of lifting accessories and/or suspension
points integrated into the load itself!points integrated into the load itself!
DANGERDANGER
Before lifting the suspended load, make sure that it is firmly placed in the saddle of the Chain hook of theBefore lifting the suspended load, make sure that it is firmly placed in the saddle of the Chain hook of the
electric chain hoist!electric chain hoist!
WARNINGWARNING
Do not install lifting accessories in the hook saddle whose dimensions are not sufficient to fit on the axis ofDo not install lifting accessories in the hook saddle whose dimensions are not sufficient to fit on the axis of
the chain.the chain.
6.66.6 USEUSE
The machine operator must be a competent person in optimal psychophysical conditions, i.e. unaffected by factors
such as fatigue, distraction, substances such as medications, drugs, etc.
WARNINGWARNING
Ensure that there is no unauthorized personnel in the installation area, and allow access to it only toEnsure that there is no unauthorized personnel in the installation area, and allow access to it only to
persons who are informed about exposure to the risks arising from the installation and handling ofpersons who are informed about exposure to the risks arising from the installation and handling of
suspended loads!suspended loads!
After installation procedures raise the load by a few centimetres and, with the chain in tension, check that the
Body/Chain hooks are correctly positioned at the anchoring point and at the point of connection to the suspended
load.
In case of use of hoists with double chain fall (multiple chain lengths) check that the chain is not twisted. If
necessary, rotate the pulley-hook block until the twist is completely removed.
Move the suspended load steadily, avoiding intermittent operation of the control system.
DANGERDANGER
Do not move the suspended load if the chain is twisted!Do not move the suspended load if the chain is twisted!
DANGERDANGER
Do not approach the moving chain so as not to be exposed to the risk of entanglement and/or dragging!Do not approach the moving chain so as not to be exposed to the risk of entanglement and/or dragging!
CAUTIONCAUTION
Always ensure that there is good communication between operators, installers and riggers and that theAlways ensure that there is good communication between operators, installers and riggers and that the
operator has a good view of the machine and moving loads.operator has a good view of the machine and moving loads.
During the handling of the suspended load with the hoist, the operator must have full view of the hoist and, if
necessary, be in contact with other people able to supervise the lifting operations.
The operator must ensure that during handling the suspended load does not collide with obstacles or that no one
is present in the areas of exposure to the dangers typical of lifting operations.
It is allowed to lift the hoist when it is still in its packaging or container in order to minimize manual load handling
operations.
To Next Page
Loading...