EasyManua.ls Logo

EXE Rise - Single or Multiple Lifting; D8 and D8+ Prefixes

Default Icon
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USE AND MAINTENANCE MANUALUSE AND MAINTENANCE MANUAL
Chain hoist from 198kg to 2500kg
1.5.21.5.2 SINGLE OR MULTIPLE LIFTINGSINGLE OR MULTIPLE LIFTING
EXE RISE electric chain hoists can be used individually or configured as a group for multiple lifts.
A multiple lift must be carried out by means of EXE RISE electric chain hoists of the same model and capacity.
WARNINGWARNING
Multiple lifting operations must be carried out only with sets of EXE RISE electric chain hoists.Multiple lifting operations must be carried out only with sets of EXE RISE electric chain hoists.
A multiple lift with electric chain hoists other than EXE RISE ones may cause unforeseen hazards not covered by
the risk analysis of the machine.
Residual risks due to multiple lifting shall be assessed and minimised by additional protection measures including,
but not limited to:
calculation of suspended loads;
using load cells;
use of appropriate control systems;
specific risk analysis and assessment.
1.5.31.5.3 D8 AND D8+ PREFIXESD8 AND D8+ PREFIXES
Static suspension of loads with the presence of people in the danger zone may be carried out under the following
conditions.
With EXE RISE D8 series electric chain hoists, secondary safety devices are required to create an
additional static load suspension system.
With EXE RISE D8+ series electric chain hoists, secondary safety devices are not required, as specified
in the reference procedure code IGVW SQP2:2018 and technical document EN 17206:2018 for UC1
and UC2 classes.
Any other use not included in the intended uses shall be prohibited, unless the machines - as a group, constituting
an additional set of machines - are supplemented with sufficient safety devices or additional protections to permit a
change of use.
In the case of a change in use, the manufacturer of the set of machines shall declare the compliance of the new
machine.
In case of any doubts or queries please check with the manufacturer and/or authorised representative whether a
particular use complies with the intended ones.
DANGERDANGER
The intended use of EXE RISE D8 and D8+ electric chain hoists does not include the movement of loadsThe intended use of EXE RISE D8 and D8+ electric chain hoists does not include the movement of loads
with the presence of people in the danger zone, for example, movements above people.with the presence of people in the danger zone, for example, movements above people.
WARNINGWARNING
EXE RISE D8 and D8+ electric chain hoists cannot be used to move people.EXE RISE D8 and D8+ electric chain hoists cannot be used to move people.
WARNINGWARNING
A multiple lifting system with D8+ hoists shall be equipped with an automatic load detection device and anA multiple lifting system with D8+ hoists shall be equipped with an automatic load detection device and an
automatic stop of all moving machinery in the event of overload.automatic stop of all moving machinery in the event of overload.
LLaanngguuaaggee:: EENN MMaannuuffaaccttuurreerr:: RRWWMM SS..RR..LL AAuutthhoorriisseedd rreepprreesseennttaattiivvee:: AARREEAA FFOOUURR IINNDDUUSSTTRRIIEESS IITTAALLIIAA SSRRLL 9

Table of Contents