USE AND MAINTENANCE MANUALUSE AND MAINTENANCE MANUAL
Chain hoist from 198kg to 2500kg
figure 3.10 – External chain guide plate
The Body/Chain hook codes are given in Chapter 11 of this operation
and maintenance manual.
3.83.8 CHAIN BAGCHAIN BAG
EXE RISE electric chain hoists come with a PVC-coated 840 nylon chain bag. The chain bag is available in 5
different sizes (XS, S, M, L, XL and XXL) depending on the size and length of the chain the hoist is equipped with.
WARNINGWARNING
When the whole chain is collected in the bag, at the last one quarter of it must be empty so as to preventWhen the whole chain is collected in the bag, at the last one quarter of it must be empty so as to prevent
the chain from accidentally falling out.the chain from accidentally falling out.
Below, referring to figure 3.11, follows the size and technical specifications of the chain bags, and the maximum
permitted chain length in order not to exceed 75% or 65% capacity of the chain bag.
CodeCode SizeSize WeightWeight
[kg][kg]
A [mm]A [mm] B [mm]B [mm] C [mm]C [mm] Meter of chainMeter of chain
LT CHB029LT CHB029 XS ≃0.75 14 9 40 Ø4/32m @75%
LT CHB059LT CHB059 S- ≃0.75 20 17 17 Ø5-6/12m @75%
LT CHB024LT CHB024 S ≃1.00 20 17 34 Ø5-6/25m @75% - Ø8/12m @75%
LT CHB025LT CHB025 M ≃1.00 20 17 42 Ø5-6/40m @75% - Ø8/25m @75%
LT CHB026LT CHB026 L ≃1.00 20 17 58 Ø5-6/65m @75% - Ø8/40m @75%
LT CHB051LT CHB051 L+ ≃1.00 27 21 55 Ø8/50m @75% - Ø10-11.3/20m @65%
LT CHB028LT CHB028 XL ≃1.00 27 21 65 Ø8/70m @75% - Ø10-11.3/30m @65%
LT CHB056LT CHB056 XXL ≃1.50 20/20 25/40 80 Ø10-11.3/50m @65% - Ø13/40m @65%
LT CHB058LT CHB058 XXXL ≃10.00 20/20 20/40 125 Ø10-11.3/80m @75% - Ø13/60m @75%
The chain bag is attached to the frame of the hoist (body) through a special bracket. Positions the bag correctly
depending on the hoists orientation (body up or body down).
The bag is attached to the bracket by means of 2 quick link carabiners compliant with DIN 56927 or DIN 5299
standards or equivalent. These carabiners report the working load limit (WLL).
DANGERDANGER
The carabiner must be positioned and oriented in such a way that the closure is carried out by screwing theThe carabiner must be positioned and oriented in such a way that the closure is carried out by screwing the
nut downwards.nut downwards.
The size and technical characteristics are given, referring to figure 3.11.
To Next Page
Loading...