Introducing the EXFO EX1
EXFO EX1 3
EXFO EX1 Device
USB-C Charging Port
The battery of the EXFO EX1 device is not fully charged at the factory.
Charge the battery before using the EXFO EX1 device for the first time or
when it has been unused for extended periods.
The battery needs to be fully charged before using the unit for the first time.
To charge the EXFO EX1 device:
1. Connect the supplied USB cable to the USB power adapter.
2. Connect the other end of the USB cable to the EXFO EX1 USB-C
charging port.
3. Connect the USB power adapter to a power outlet.
The battery is fully charged when the battery green LED stops flashing. The
charge cycle starts and stops automatically.
Note: Refer to Recharging the Battery on page 44 for more information.
To Next Page
Loading...
