EXFO EX1 - 6 Speedtest Settings; Test Configuration Options

EXFO EX1 31
6 Speedtest Settings
The Settings page allows the configuration of the test, reports, and system
parameters.
From the Speedtest page, tap the settings button .
Test
Speedtest Servers
Determines how the Speedtest server will be selected.
 Automatic Server when enabled, automatically determines the server
closest to the client following the Ookla proprietary method.
 Selected Server, available when the Automatic Server is disabled,
allows the user to choose a server from the list provided by Ookla. Tap
on this field, select a server from the list, and tap OK.
Thresholds
Allows enabling and setting the threshold values that will be used to
declare the pass/fail verdict for each test. Thresholds are disabled by
default. Threshold settings are saved independently for each interface type:
RJ45 and Wi-Fi.
 Latency Threshold when enabled, allows entering the maximum
threshold value in ms.
 Download Threshold when enabled, allows entering the minimum
and maximum threshold values in Mbits/s.
 Upload Threshold when enabled, allows entering the minimum and
maximum threshold values in Mbits/s.