Getting Started
16 EXFO EX1
Starting the Speedtest for the First Time
Starting the Speedtest for the First Time
It is possible to start the Speedtest from the smart device EXFO EX1
application assuming the EXFO EX1 device is turned on and connected to
the network to be tested.
To start the Speedtest:
1. Start the EXFO EX1 application on the smart device.
Ensure that Bluetooth is enabled on the smart device.
1a. For Android smart devices, confirm that the EXFO EX1 application
can access the smart device location otherwise the application
will not work.
1b. Confirm the enabling of Report Diagnostic Data. Refer to
Diagnostics on page 40 for more information.
2. From the Connection page, select an EXFO EX1 device from the list
(refer to Connection on page 18).
3. Once connected, the application opens automatically the Speedtest
page (refer to Speedtest on page 25).
3a. Tap the setting icon
and set the test parameters (see Speedtest
Settings on page 31).
3b. Make sure the status bar is displaying the interface rate (refer to
Speedtest on page 25).
4. From the Speedtest page, tap the start button
(refer to Start/Stop on
page 26).
5. Once the test is completed, tap the quick report button
to consult
the full test results (refer to Speedtest on page 25).
To Next Page
Loading...
