Working with Your Unit
102 FTB-200 v2
Accessing the Internet with a 3G USB Modem Key
3. Install the retrieved kits on your unit:
3a. Install the System Upgrade. For more information, refer to the
installation procedure provided with the kit.
3b. Once the installation of the System Upgrade is complete, install
the Platform kit on your unit. For more information, refer to the
Readme file provided with the kit.
Note: At this point, if you have used a USB memory key to transfer the installation
files to your unit, you can remove it.
You are now ready to install the AirCard Watcher application as explained
hereafter.
To install the AirCard Watcher application on your unit:
1. If necessary, turn on your unit and wait for the startup sequence to
complete.
2. If necessary, insert the SIM card into the USB modem key. For more
information, refer to the documentation that came with your modem
key.
3. Connect the USB modem key to one of the USB ports of your unit.
The installation of the AirCard Watcher application will start
automatically.
To Next Page
Loading...
