Working with Your Unit
90 FTB-200 v2
Setting Storage Parameters for Screen Captures
Setting Storage Parameters for Screen
Captures
You can modify the file format of the screen captures as well as the
destination folder, that is the folder to which the captures will be sent.
By default, images are saved in .bmp format, but you can configure the
application to save them in .jpg or .png format.
By default, images are kept in the following folder:
D:\Documents and Settings\User_currently_logged _on\My
Documents\Screen Snapshot
where User_currently_logged _on corresponds to the user name of the
person that is currently logged on the unit.
You can select any other folder as the destination either locally on your
unit, on a USB memory key.
Note: If the specified folder is no longer available (folder name has been
modified, folder has been deleted), the screen captures will be sent to the
default folder. Similarly, if you have defined a destination folder on a USB
key and this key is not connected to your unit when you take screen
captures, the latter will be sent to the default folder.
To Next Page
Loading...
