Troubleshooting
190 FTB-200 v2
Solving Common Problems
Problems or errors
occurred during the
installation of the VPN
client.
--- Restart your unit and start a new
installation. If the problem persists,
restore your unit. To do so, see the
Restoring Your Unit to Normal
Operation section.
You want to change your
VPN client for another
client.
OR
You need to remove the
VPN client from your
unit.
--- Restore your unit. To do so, see the
Restoring Your Unit to Normal
Operation section.
The VPN client has been
updated accidentally.
--- Restore your unit. To do so, see the
Restoring Your Unit to Normal
Operation section.
a. A complete battery calibration cycle consists of a full charge, immediately followed by a full discharge,
then followed by a full charge.
Problem Cause Solution
To Next Page
Loading...
