Exmark NAVIGATOR Parts Manual

PARTS MANUAL
NAVIGATOR
Date Purchased
Engine Model No. and Spec. No.
Engine Serial No. (E/No)
Model No.
Serial No.
The Serial No. plate is located at the rear of the machine under the
hopper adjacent to the rear caster pivot. For ease of ordering and
reference, we suggest that you record the information requested.
Place Model No. And Serial No.
Label Here (Included in Literature
Pack) or Fill in Below
®
Part No. 4500-213 Rev. A
For Serial Nos.
720,000 & Higher

Exmark NAVIGATOR Specifications

General

Drive System	Hydrostatic
Deck Construction	Fabricated
Transmission	Hydrostatic
Deck Material	Steel
Turning Radius	Zero-turn
Cutting Width	42 in
Blade Tip Speed	18, 500 fpm
Engine Type	V-Twin