EasyManua.ls Logo

Exmark VIKING 408 - Check for Loose Hardware; Service Air Cleaner; Change Engine Oil

Exmark VIKING 408
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
g010195
Figure7
1.Rod4.Mowerdeck
2.Spring5.Dischargedeector
bracket
3.Dischargedeector
6.Assembledview
3.Hookthebentendoftherodaroundthefront
dischargedeectorbrackettoretainitfrom
slidingout.Placethelegofthespringwiththe
loopinthenotchinthedischargedeectorto
holdthedischargedeectorinthedownposition
(seeFigure7).
Important:Thedischargedeectormustbe
springloadedinthedownposition.Liftthe
deectoruptotestthatitsnapstothefull
downposition.
CheckforLooseHardware
ServiceInterval:Beforeeachuseordaily
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.Visuallyinspectmachineforanyloosehardware
oranyotherpossibleproblem.Tightenhardware
orcorrecttheproblembeforeoperating.
ServiceAirCleaner
ServiceInterval:Every25hours—Service
thefoamelement.(May
needmoreoftenunder
severeconditions.See
theEngineOwner's
manualforadditional
information.)
Every100hours—Service
thepaperelement.(May
needmoreoftenunder
severeconditions.Seethe
EngineOwner'smanual
foradditionalinformation.)
Every200hours/Yearly
(whichevercomes
rst)—Replacethepaper
element.
1.Stopengine,waitforallmovingpartstostop,and
removekeyorsparkplugwire(s).Engageparking
brake.
2.SeetheEngineOwner'sManualformaintenance
instructions.
ChangeEngineOil
ServiceInterval:Aftertherst5hours
Every100hours(May
needmoreoftenunder
severeconditions.)
1.Stopengine,waitforallmovingpartstostop,and
removekey.Engageparkingbrake.
2.Drainoilwhileengineiswarmfromoperation.
3.Theoildrainhoseassemblyislocatedontheleft
sideoftheengine.
Placepanundermachinetocatchoil.Removeoil
drainplug.Allowoiltodrainandreplaceoildrain
plug.Torqueplugto20-24ft-lb(27-33N-m).
4.ReplacetheoillterpertheEngineOwner's
Manual.Cleanaroundoillterandunscrewlter
toremove.Beforethenewlterisinstalled,
applyathincoatingofExmark4–CyclePremium
Engineoilonthesurfaceoftherubberseal.Turn
lterclockwiseuntilrubbersealcontactsthelter
adapter,thentightenlteranadditional2/3to
3/4turn.
5.Cleanaroundoilllcapandremovecap.Fillto
speciedcapacityandreplacecap.
6.UseoilrecommendedintheCheckEngineOil
Levelsection.DoNotoverll.Starttheengine
24

Table of Contents

Related product manuals