EasyManua.ls Logo

Explorer Technology Group DLV50 User Manual

Default Icon
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operators Manual
DLV5
0 Data L
Rev: 03
Date: 6/26/2012
DLV50 Firmware: Rev 000.009 and above
Winmeter 5.0 Software: Rev 1.0.0 and above
Operator’s Manual
0 Data L
ogging Voltmeter
ogging Voltmeter
Plus
Question and Answer IconNeed help?

Do you have a question about the Explorer Technology Group DLV50 and is the answer not in the manual?

Explorer Technology Group DLV50 Specifications

General IconGeneral
Power Source9V battery
Operating Temperature0°C to 50°C
TypeDigital Level
Accuracy (Angles)±0.1°
DisplayLCD
Dimensions (Angles)150mm x 60mm x 30mm

Summary

2.0 DLV50 Menu System Navigation

2.4 DLV50 VDC Mode Operation

2.4.1 Selecting a Voltage String

Guides users on how to select a specific string (A-H) for voltage readings.

2.4.2 VDC Mode Sub-Menu Options

Details the 7 options available within the VDC Mode sub-menu for data management and analysis.

2.5 DLV50 HYD Mode Operation

2.5.1 Selecting a Hydrometer String

Explains how to select a specific string (A-H) for hydrometer readings.

2.5.2 HYD Mode Sub-Menu Options

Outlines the 7 options available in the HYD Mode sub-menu for data handling and viewing.

4.0 Managing DLV50 Data and Thresholds

5.0 Taking DC Cell Voltage Measurements

5.1 Measuring DC Cell Voltages

Step-by-step guide on how to measure DC cell voltages using the DLV50.

6.0 Uploading Hydrometer Data to DLV50

6.1 Transferring Data from DMA35 to DLV50

Describes the process of transferring hydrometer data from a DMA35 device via IRDA.

7.0 Connecting DLV50 to PC/Winmeter 5.0

8.0 Upgrading DLV50 Firmware